Polytron 7000
The Dräger Polytron 7000 is an intrinsically safe gas detector for the continuous monitoring of toxic gasses and oxygen. With its unique modular design and total flexibility: The Dräger Polytron 7000 is a truly universal transmitter that can satisfy all toxic and oxygen measurement applications on a single platform. SIL 2 Approval guarantees no unrevealed failures.
For easy, time-saving mounting and commissioning of the Dräger Polytron 3000 or 7000. One is required for each Polytron 3000 or 7000.
Order no: 83 17 990
For the remote operation of the sensor at a distance of up to 30 m. Suitable for wall and duct mounting depending on the accessories used.
Order no: 83 17 275
Enables the mounting of the Dräger Polytron 7000 onto exhaust ducts or pipes. With 90° swings, the transmitter can be put into a user-friendly position.
Order no: 83 17 150
The Palm Pilot allows for communication with the Dräger Polytron 7000 to configure or duplicate configuration data and to download datalogger information.
Order no: 83 17 995
Simplifies work on the Dräger Polytron 7000 whenever the PALM or IR Interface is used.
Order no: 83 19 087
Control software for Data dongle information (data logger)
Order no: 83 14 034
Adapter for permanent gassing and the calibration of transmitters with electrochemical sensors (not type AC), catalytic sensors (pellistors) and transmitters of type Polytron IR CO2 and Polytron IR Ex HC. Also suitable for continual use in connection with the sampling unit.
Order no: 68 06 978
Viton adapter for zero-point tests and the calibration of transmitters with electrochemical sensors (not type AC), catalytic sensors (pellistors) and transmitters of type Polytron IR CO2 and Polytron IR Ex HC.
Order no: 68 10 536
Adapter for permanent gassing and the calibration of transmitters with electrochemical DrägerSensorAC. Also suitable for continual use in connection with the sampling unit.
Order no: 6809380
Special pump adapter for the DrägerSensor AC. Only use in combination with the calibration adapter AC (Part No.: 6809380).
Order no: 8317976
Guards the DrägerSensors against splashing water. Not suitable for the DrägerSensor AC.
Order no: 6807549
Guards the DrägerSensor AC against rain water
Order no: 6809379
Configuration and calibration software for the following stationary gas detection systems: PIR 7000, PIR 7200, Polytron 7000, including status and diagnosis functions.
Order no: 68 11 989
For the calibration of electrochemical sensors (not type L). Creates a defined gas concentration when using Dräger test gas ampoules.
Order no: 68 03 407
For use with the calibration bottle. Test gas ampoules are available for the following gases/concentrations:
Test gas ampoule / Order No:
SO2 10 ppm / 68 07 763
SO2 50 ppm / 68 07 764
NO2 10 ppm / 68 07 765
NO2 50 ppm / 68 07 766
CO 100 ppm / 68 07 920
CO 300 ppm / 68 07 921
NH3 300 ppm / 68 07 923
NH3 50 ppm / 68 07 924
SO2 1 ppm / 68 07 925
SO2 4 ppm / 68 07 926
Cl2 8 ppm / 68 07 928
HCN 10 ppm / 68 07 929
H2S 10 ppm / 68 08 140
H2S 20 ppm / 68 08 141
H2S 40 ppm / 68 08 142
H2S 100 ppm / 68 08 143
Data Sheet
Operational Manual
